Thursday, July 31st 2014, 11:36pm UTC+2

You are not logged in.

  • Login

Dear visitor, you are currently not logged in. Login or Register as a new user .

TiUser

Trainee

  • "TiUser" started this thread

Posts: 112

Location: Germany

  • Send private message

1

Friday, September 4th 2009, 9:49am

USB connect with Ti OS 3.1 does not work stable.

I used TI OS 2.7.5 on XP which worked fine on my system and my host.

Yesterday I upgraded to TI OS 3.1 but had to downgrade to 2.7.5 again because USB connect worked unreliable and connection got lost all the time - ending up with a message that my TI has not been detected at all on USB... I had to reset my TI all the time - pressing ARP EDIT while repowering. This just helped a short time - then the same trouble returned

None of these things happens with OS 2.7.5

Access - what have you changed in OS 3.x with USB?... ?(

2

Friday, September 4th 2009, 11:19am

hi,

2.7.5 was released like a year ago, obviously many things have changed in the last year. but at the same time, the driver has hardly changed and it doesn't seem that many people are suffering from the problem you've described above. are you in contact with access support? i'm pretty sure that they can help you in finding the root of the problem.

best, marc
The official Virus TI facebook page: http://www.facebook.com/accessvirus

TiUser

Trainee

  • "TiUser" started this thread

Posts: 112

Location: Germany

  • Send private message

3

Friday, September 4th 2009, 12:39pm

I consider contacting the support.

Last time I asked for Vista 64bit support... as I'd like to go for that.
I only still run XP 32bit because of the TI software... but there seems no official answer to the 64bit question, doesn't it?
Frankly, I don't want to spent too much time on fixing XP as what I really want is going for Vista 64bit or the upcoming Wn7 64 bit.

It's somehow wicked that TI OS 2.7.5 works better than 3.1.

I cross checked KVR forum and there are some more people having problems with 3.1. Some have gone back to 3.0.5. I haven't checked this as flashing the TI firmware always takes two coffe cup breaks... ;)

4

Friday, September 4th 2009, 1:39pm

it is totally down to you which OS you use. i just wanted to point out that there is a good chance that you can make things work without running a OS version which is a year old. there is literally thousands of people using 3.x versions with XP and they don't have connection problems.

best, marc
The official Virus TI facebook page: http://www.facebook.com/accessvirus

Luke

Beginner

Posts: 7

Location: Pittsburgh, PA, USA

  • Send private message

5

Friday, September 4th 2009, 3:59pm

Running XP sp3 with 3.1 and my virus has never worked better.

Luke

TiUser

Trainee

  • "TiUser" started this thread

Posts: 112

Location: Germany

  • Send private message

6

Monday, September 7th 2009, 1:50pm

Maybe trouble is somehow caused by the USB chipset drivers I'm using under XP.
However that does not explain why TI 2.7 works fine while TI 3.1 does not.
I'd highly prefer TI 64bit support instead of fixing an old XP system...

shaneynclan

Beginner

Posts: 12

Location: Davis, CA

  • Send private message

7

Monday, September 7th 2009, 7:32pm

i'm having issues too man.
at first i thought I had too many usb devices (keyboard & mouse), so i tried using the ps2 port for my keyboard and that still didn't help.
like i stated in the previous thread, the startup is very finicky for me, and works about 30% of the time.
i'm probably gonna have to downgrade as well.

8

Monday, September 7th 2009, 9:16pm

guys, let me just say that downgrading will not help. if it helps, it has nothing to do with the problems you're facing. if the virus doesn't connect reliably, you are dealing with an USB problem, not with an instability with Virus Control or the driver. get in touch with support. we get those cases a lot and usually we can assist you to fix the problem.

best, marc
The official Virus TI facebook page: http://www.facebook.com/accessvirus

9

Sunday, September 13th 2009, 7:02am

I'm having the same issues, I'm on Mac powerbook G4 and few days ago everything was fine but since I upated to the beta version 3.2.0.7, my virus is not been detected in my powerbook. I tried everything, restarting with the Arp=edit but hold, starting in the USB edit mode but it did'n twork. Now I'm going to try to reverse my software version to 3.1.0, lets see. ?(

10

Sunday, September 13th 2009, 7:13am

I'm having the same issues, I'm on Mac powerbook G4 and few days ago everything was fine but since I upated to the beta version 3.2.0.7, my virus is not been detected in my powerbook. I tried everything, restarting with the Arp=edit but hold, starting in the USB edit mode but it did'n twork. Now I'm going to try to reverse my software version to 3.1.0, lets see. ?(


and it worked, maybe something is wrong with the Beta 3.2.0.7