Hi there,
Is there a way I can separate the Virus Ti channels so I can use different plugin effects on each one?
At the minute I have two patches running on my Virus Ti on MIDI channels 1 and 2 in Logic. When I add, lets say an EQ, im only able to add it to the single Virus Ti channel so it effects all the patches and not just a single one. Is there a way to get around this or do I have to bounce the track out onto an audio file to add these effects?
Thanks in advance for your help.
Alex,
In Virus Control, where the part selector buttons are, you will see something like USB 1 L+R selected by default for all parts.... however, this is also a drop down menu where you can choose your other options... if you have a snow, then you have 4 stereo outs for four parts (3 USB along with the analog outs) and if you own any other TI then you have 6 stereo outs ( 3USB plus the 3 analog pairs) not sure if you can use VC and SP/DIF at the same time.
If you need more help, PM me and ill walk you through it step-by-step!
Try following the instructions in this thread.
Good luck!
