hi all,
Im a new Virus TI2 Desktop owner and loving it. I have a question to ask.
Q) How do you access "Envelope Polarity" parameters through the Hardware Interface ?
also
Q) Is there anyway to access Oscillator Phase Init through the Hardware Interface ? I havn't found it yet.
any help would be greatly appreciated , thanks 
Env Polarity: FILTER EDIT, Filter # 2/2 -> Env Polarity [Positive/Negative]
Osc phase init: Press osc edit twice, Common 1/2 -> Phase Init [Off...127]
Env Polarity: FILTER EDIT, Filter # 2/2 -> Env Polarity [Positive/Negative]
Osc phase init: Press osc edit twice, Common 1/2 -> Phase Init [Off...127]
Hi roby , thanks for the help.
However I am still having difficulties locating these parameters.
How exactly do i execute a "double press edit" ? when I press Osc Edit twice fast it just skips through page 1 and 2 of the standard edit page.
Also I still cannot locate "Phase Init" through the filter Edit menu , I do come Filter 2/2 section , but just basic things like cutoff , link , resonance etc. just cant seem to find phase init.
sorry for the noobness
Every knob section has its own edit button which brings up its own edit menu, therefore: the filter edit button is below the "filter resonance" knob, and the oscillator edit button is under the "oscillator shape" knob.
Every knob section has its own edit button which brings up its own edit menu, therefore: the filter edit button is below the "filter resonance" knob, and the oscillator edit button is under the "oscillator shape" knob.
hi there , thanks for the reply.
It took me all this time just to realise that all I needed to do was navigate using the "Parameters" <- -> button while in the edit menu.
thanks for all the help , appreciate it.
