Hi,
So Ive got a TI 1 keyboard... and my understanding was that it has balanced output...
but despite using TRS cables, the output does not appear to be be balanced.
as a test I did the following :
a) connect Out 1 L to a splitter cable
b) connect the L and R of the splitter cable to different channels on my mixer
c) play a note.
what I expect is to see a signal on both channel on the mixer...
obviously inversions... such that
if I sum both channels I would get silence
if I play either channel I should hear sound
BUT what I find, is I'm only getting a signal on one channel...
i.e. this is an unbalanced signal
I've tried all 6 outputs out , and they are all the same
Ive tried the same test with my audio interface (which supports balanced outputs) and the mixer and it works as expected...
so was I incorrect... does the TI mk 1 not have balanced outputs, or only the TI 2?
or is there some way I need to 'activate' it.... (which would seem odd)...
has anyone else got this working correctly?
thanks for your help/insight
Mark