Virus Ti Effects

The TI Vst should be listed in your fx plugins depending on the DAW you are using.

Zitat von mike077

Hello
How do i use the virus ti effects in other channels that the virus isnt the instrument?

I think I do not understand the question. What do you want to acheiv?

Hello Mike,

have a look on this:

Ableton - Virus Ti Tutorial - How to Pass Audio through the Virus Effects section

Cubase - Using Access Virus Ti as external Effects Processor in Steinberg Cubase

Great you got it running
Enjoy !

Indeed

best thing you can do is disconnect everything except the Virus for the moment, and get that running right and then reconnect the other gear one by one !
Good luck

Zitat

btw
the virus is my sound card

Virus Control offers you 3 different output configurations. In order to make
everything work as expected, you need to select the mode before you move on:

2 Outputs / No Input: This mode offers two stereo outputs (one main output and
one auxiliary output). Also, the Virus doubles as a stereo input/output sound card.

3 Outputs / No Input: This mode offers three stereo outputs (one main output and
two auxiliary outputs). The Virus will only partially work as a sound card - the
outputs are working, but recording sound from the analogue inputs of the Virus TI
hardware is disabled.

3 Outputs / 1 Input: This mode offers three stereo outputs (one main output and
two auxiliary outputs) and enables side-chaining audio into the plug-in. The Virus
TI’s ability to double as a sound card is completely disabled.

and

Audio Side-chaining

“Side-chaining” means to feed audio from one device into another, bypassing the
actual audio inputs. For us, it means that you can send audio from your sequencer
into Virus Control (and therefore the Virus hardware), mangle with it, and then send
it back.

In order to use side-chaining, you need to enable the “3 Outputs / 1 Input” mode in
Virus Control’s settings first. Please note that once this mode is enabled, the Virus
cannot double as a sound card anymore. Also, please note that, at the time of
writing, the side-chaining implementation of some sequencers is either non-existent
or faulty. Steinberg Cubase for instance does not support it at all for virtual
instruments and, at the time of writing, Apple Logic has an issue which results in a
delayed audio signal at the side-chain input.

Zitat von blinde_Q

In order to use side-chaining, you need to enable the “3 Outputs / 1 Input” mode in
Virus Control’s settings first. Please note that once this mode is enabled, the Virus
cannot double as a sound card anymore. Also, please note that, at the time of
writing, the side-chaining implementation of some sequencers is either non-existent
or faulty. Steinberg Cubase for instance does not support it at all for virtual
instruments and, at the time of writing, Apple Logic has an issue which results in a
delayed audio signal at the side-chain input.

Alles anzeigen

Interesting! Though the section about Cubase not offering side chaining might be outdated. In which resource did you find that?

Zitat

In which resource did you find that?

you can find this it in the "Virus TI Setup Guide.pdf" locaded in your Access Virus Manuals folder.

Zitat von blinde_Q

you can find this it in the "Virus TI Setup Guide.pdf" locaded in your Access Virus Manuals folder.

Thanks!