Really appreciate everybody here over the years.
I have a sync issue with my virus TI2 Desktop when using Logic pro X in cycle mode. (try that in Live without any problems)
As you can see and hear in the video (link attached), when played in cycle mode it starts just fine, and after, when it goes back to start point of the event it get all messy and out of sync. ***** https://youtu.be/sQzEqu4UJoI ******
I've tried\did the following:
I connect the USB directly to the computer and disconnect all other USB cables.
I switched between USB connectors and also tried Hub with USB 2 Connectors.
I replaced the USB cable and tried 3 different cables.
Tried several i\o buffer sizes (64, 128, 256, 512)
Tried several sample rates (44.1, 48, 88, 96)
I use 1.5m cable.
My process buffer range is "small"
The plugin latency compensation is set to "all"
The "low latency mode" is disabled.
Don't know what else to try.
I really hope someone know what to do to fix this issue.
Thanks a lot..
** Virus TI2 Desktop. OS - 5.1.6.05 **
** Mac Pro 6-Core Intel Xeon E5, 3.5 GHz, 32 GB Memory. macOS Sierra 10.12.2 **
** RME FireFace 400. **
** Komplete Kontrol S61.**
** Logic Pro X 10.2.4 **