Beiträge von Prime_NL

Zitat von genesisfan

Hi NL
Could you list the name of you speaker monitors
Please identify you keyboards & hardware?

Here you go (including speakers) :

On the left side :
- Moog Voyager Signature Edition with Walking Stick Ribbon Controller
- Bottom : Moog MP-201 Multi Pedal & Rocktron Banshee 2 Talkbox
- Yamaha 01V mixer (Expanded)

On the desk :
- Virus TI Desktop
- genoQs Nemo (Step Sequencer)
- x0xb0x Special Edition
- Moogerfooger MF-105M
- Akai MPC 1000
- TC Electronic Level Pilot
- Jomox Xbase 999

Racked on Desk level :
- TC Electronic Finalizer 96k
- TC Electronic Fireworx
- Studio Electronics ATC-1 & Selector wih all filters (Mini, 303, S.E.M., 2600)

Racked on bottom level :
- Peavey amplifier
- DBX 166A Compressor
- Switches for the Power Supply

Top of the Desk :
- Event 20-20 Monitors on Auralex Mopads
- Some LCD Screen for the Mac

For the rest a Mac G4 MP computer and some old audio equipment for the samples...etc...

Well....here is my comfy place to play around :

[Blockierte Grafik: http://i46.tinypic.com/soxsmu.jpg]

[Blockierte Grafik: http://i50.tinypic.com/vimu7k.jpg]

[Blockierte Grafik: http://i45.tinypic.com/2e2mpg5.jpg]

[Blockierte Grafik: http://i47.tinypic.com/2w49oqt.jpg]

Zitat von ghostcopy

re the OS4 has anybody installed on mac OSX 10.4.11 ?

also does this address sidechain issues in logic 8 and one more thing is it says its just for 10.5 onwards

when its an official version not a beta version will it work for my operating system

love my snow ..
thanx

Alles anzeigen

I installed it on my Mac with OS 10.4.11 without any problem whatsoever.....

Maybe this can help you ?

http://www.access-music.de/for…?page=Thread&threadID=725

Wasn't this the temp. solution : http://www.access-music.de/for…?page=Thread&threadID=725

Kids....please stop the quarrel and enjoy the weekend shall we....?

You can find it also over here : http://www.access-music.de/for…p?page=Thread&threadID=49

Zitat von Timo

q1/2004

Lol...2004....

Zitat von chbaum

What I find strange so far: There's not even ONE single Mac user here, reporting on their experiences. Don't you have any problems with the new beta, or don't you dare to install? I actually don't (yet), since I'm in the middle of a bigger project. But my problems with 3.3 are vast, so it would be quite interesting to here something from some early adopters.

Best regards,

Christian

I will give you a update as a Mac user....

Had the following issue with TIOS 3.3.4 (Mac running OSX 10.4.11 & Dedicated USB 2.0 Card) :

I tried to install. OS 3.3.4 but as soon as i came to the firmware update part my Virus was not recognized anymore.
Had to restart my Mac and startup the Virus Control....my Virus was then recognized again and i could update it to 3.3.4 without any problem.

Afterwards i had the following problems when running it standalone.....as soon as i try to connect it to the Virus Control Centre or the plugin in my DAW it does not recognize the Virus at all.
Tried all tricks to let the Virus be recognized again (Exit button, ARP Edit button, different USB ports, no other stuff connected to USB...etc..) but to no avail.

What i do notice though is that the Virus is recognized when i run the installer application, so as soon as it wants to install. the firmware with the installer app. it recognizes the Virus and will install. this accordingly.
Also remarkable is the fact that the Virus can be found in the hardware diagnostics app....when looking at my USB ports it says Virus TI to the one which it is connected to.

Hi....nice to meet you No audio or midi....

Nice track...interesting sounds used....keep it up !

Never use a USB hub....give the Virus it's own dedicated USB connection.

Zitat von spanda

More Bugger, OS 3.3 looses audio with the short USB cable like 3.1 did with the Long USB Back to 3.1. Hope its still working????

Did you also try TIOS 3.2.0.07...???
Cause i have the feeling that the USB drivers of this Beta release are different then the ones for TIOS 3.3.0.00

I have the following issue with TIOS 3.3.0.00 (Mac running OSX 10.4.11 & Dedicated USB Card) :

Have no problem with this TIOS running it standalone but as soon as i try to connect it to the Virus Control Centre or the plugin in my DAW it does not recognize the Virus at all.
Tried all tricks to let the Virus be recognized again (Exit button, ARP Edit button, different USB ports, no other stuff connected to USB...etc..) but to no avail.

What i do notice though is that the Virus is recognized when i run the installer application, so as soon as it wants to install. the firmware with the installer app. it recognizes the Virus and will install. this accordingly.
Also remarkable is the fact that the Virus can be found in the hardware diagnostics app....when looking at my USB ports it says Virus TI to the one which it is connected to.

I switched back to TIOS 3.2.0.07 and everything works as it should be concerning the problem i had with the Virus not being recognized by my computer....as soon as i switch to TIOS 3.3.0.00 again the Virus is not recognized.
(To test my theory i have done this several times including shutdowns or restarts of my computer and it is reproducable)

I hope this can be solved in the next Beta release as i think there is a difference between the USB drivers in TIOS 3.2.0.07 and those of TIOS 3.3.0.00 for the Mac.

Zitat von d-joriz

thanks, i,am gonna check them imidietly when i come home from work!

nice one

Don't have enough yet...?

Nice info...tx..

Marc....Timo.....anybody...???

Is there a way to see which products i have registered on my Acces account ?

I had to read it a couple of times before i could understand the reply you gave Monomeester.....one of the weirdest replies to a post i have seen on this board....

You can save the sounds to the RAM positions.