Beiträge von psylence

Each patch may send only to 1 output (or 2 outs when stereo), however, here are some ideas for you:

-You can select, say,output "Out1 L+R" and link the L to the amp and the R to the recording device, however, both outputs will be mono.

Even better:
-Out1 L+R sends a copy of the signal via SPDIF, so you can link for example the analogue outs to the amp and the SPDIF to the recording device. As a side note another copy of the Out1 of the signal goes out via the headphones port but I don't know if the sound quality is sufficient for recording purposes

Another idea:
-Usually audio interfaces allow you to send a copy of an input elsewhere by messing around with routing options, provided of course your audio interface supports routing possibilities

Edit one - this just hit me:
-You may also use the surround out in the config page to set your secondary out , then set the balance of the 2 out options in the common section.

Hope this helps!

Guys? Anyone knows about the above query regarding 64bit parameter automations after channel 7? Is there a limit or is it within my DAW?

On the 32bit plugin of Virus Control (VC):
-In VC: move parameter you wish to automate
-In VC: right click - Add <parameter> to automation
-On FL - Tools - Last tweaked - do whatever you wish

Now on the 64bit VC all the parameters are already mapped for you so you would simply automate as if it were a normal VST. However it seems that only the first 7 patches are pre-mapped and you cant do any automations on channels 8-16, or that's what happens to me, maybe someone else can help on that please?

Hey...somewhat unrelated to your post, once you manage to transfer the patches, would you please be so kind as to record the same patches from both instruments so that we can listen & compare? I don't think there's a C vs TI2 comparison...

With you stumbling out of the bed, am I correct to understand that your virus is also turned on autonomously? If that happened to me, the first thing I would check is the power cable...try feeding your virus from a completely different power source (preferably from another wall!) and let us know your findings. Have the USB off as well - have your virus connected only with power cable and listen to it via headphones...keep master volume down

M.

Zitat

KB (midi out) => Virus (midi in) - with connect USB to my Mac - does not work

this, however, is not the case with Windows! It works fine whether connected to USB or not.

I have a very similar setup

KB (midi out) => Virus (midi in)
Virus (midi thru) => ML (midi in)

Control which instrument to control by changing global channel on the midi KB.

I'm considering an ML myself..sometime, maybe.

How about you just create a template for this purpose within your daw? Just remove all midi/audio tracks, load the VC and save as-is!

Hi JohnBurns, I believe the SPDIF out is a copy (keyword!) of out1 (or usb1?) - just like the headphones output socket. I dont have SPDIF cables ATM to try out for you. I hope this answers all 3 questions! Let us know

Have you checked your global tuning?

Well...in that case... Pure economic theory states that if supply is constant, and demand decreases, the equilibrium price should also fall *....but that's none of my business...*

Have you actually linked the Virus to a channel on your mixer (not master)? And are you using USB to output audio?

Hi J-Trax

I do do not use the Virus in Stereo mode.
Here's what I do with no issues:
-Load the Virus plugin and do not select to use it in stereo mode - press cancel.
-Link the Virus plugin to a channel (say channel 1)
-Go to your mixer options (most left arrow on the actual mixer) and then
-2nd option: plugin delay compensation. If selected to "automatic" you should be ready to go, provided that you link ALL the other channels no any other channel apart from channel 1 (where we linked the virus plugin). If automatic is OFF then you must go at the bottom of each channel (again apart from channel 1) and select the bottom right clock (whete PDC is shown) and choose SET FROM - CHANNEL 1 (virus).

Also on the virus software, click "?" bottom left and go documentation, tutorials, FL STudio. Access have also released a demo project with FL but I cant seem to be able to locate it now.

Let me know if this helps!

Hi J-Trax
I will respond to your new threat. http://www.virus.info/forum/in…/?postID=32461&#post32461
Mario

This sounds more like a routing process that can be done from your saffire mix control directly under routing options. Regarding the virus, on the synth directly, press Config - go to inputs 2/2 and select source SPDIF. Hope this helps!

One of us, one of us, one of us

I used to have a similar issue on Win 8 though, it turned out to be my graphics card actually...I managed to get it fixed via a graphics card update. Try to mess around with the virus but have the TI software not on display, does it still freeze?

I'm using 5.1.1 on FL12, no issues.

OK I got it! In case someone runs into a similar problem: in FL, in the wrapper settings, you have to have "fixed buffer size" disabled

Below is a picture that shows all the relevant settings, as well as my awesome photoshop skills (...)