Mac OS Sierra when are you guys going to post a new driver software for the virus control...
Beiträge von watuse
-
-
your right I try to do this and we could not do this I have been trying to do this even with the LFO modultion but its not the same.
-
I try to go back to 4.5 but it would not recognise my synth the virus control has the doctor heartbeat listening device.
-
It makes my system go completely unstable, I get all sorts of sync problems and the computer goes completely unstable, I get the rainbow roll of death and the system slows down like if it was an old PC from the 1990
-
I have a major problem with this version while using screenflow and recording a video tutorial with the new OS 5.01.05 the entire systems goes all hell, it slows down the computer acts like if t was an old PC from the late 90 and it is out of control I want to go back to the 5.0 version because its very very very very very unstable I posted a video once I try to do something with the virus control
-
Yeah is this problem going to be solve in OS 5 thats is the reason why you guys are going to add new filter poles, and new envelopes, Hope this gets fix because it does seem to be noticeable in Hypersaw.
-
Here is a patch which I want you guys to listen why is that my hyper single OSC saw patch sounds thicker at times and thinner at times like there is a problem with the frequencies which is not a constant note hit
I started this patch with a initialized one and gotten to this point when I notice a up down frequency -
I want to know if there would be an OS 5 this month, because I cannot wait to start experimented new sounds with these envelope.
-
When would it be out can't wait for sound designing with this new OS
-
I would buy a sound set that would have some dramatic deep dark dub chords.
-
I want to know if I could create these bad ass dub techno chord sound and stabs like in this demo.
also the long padded chord sounds this is a very popular technique.
http://youtu.be/S873vksDDVk
http://youtu.be/7KSrvmCcigs
http://youtu.be/gywKc4Zg8mY
http://youtu.be/SAJmNJT3xSs
http://youtu.be/4e_GuDBSsTw
http://youtu.be/E_vMGqDNnKYThese are all bad ass producer in the dub techno scene
Hope all these example could give me some insight on how to create these chords with my virus ti
-
what was it like I I just got the virus ti snow, so I have no idea how it was it.
-
Yeah, Live's auto filter uses an LFO.
Hey watuse, simply go into the Virus' LFO menu and LFO 2 has pre-routed cutoff knobs for each filter. Just in case you're not familiar with how modulations work, make sure to keep an eye on your filter menu too as there is a balance knob between the 2 filters. If you're running in serial (the default setting), and you decide to modulate the cutoff (through an LFO) of only one of the filters, you may not hear the effect of the modulation as strongly as if you only let one of the filters through the mix. In other words, turn up the Filter 1 knob on LFO 2 and position the filter balance knob to the left to hear what it's doing.
I have tried and its not the same as the auto filter of ableton live if that feature could be implemented on the virus ti filtering process, to automatically do it on certain time or even sync time it would be phenomenal feature.
-
I want to know if I could use the hardware with out the VST AU software and use its 16 midi channels, is that possible or do i need to use the midi in and out of the synth itself.
-
It's an edited image Watuse, not in the VST.
Been a few days, can we get any comment from Access?
I doubt Access would do something like this. For sure they would not put this feature. I wish they did.
-
how do you get that in the virus ti software.
-
well hell this is definitely a new thing to me. thanks for sharing.
-
I do not know why the less midi parts in the virus ti snow when the desktop is 80 to 100 polyphony, the other day I was testing the virus ti using up all it's part, it does run out, the problem is that two of the pad sounds, one would sound gated. So in some cases the synth would not lose it's quality sound and compensate by doing some sound filling. Almost like a compressor type sidechaing effect also.
-
-
I think you're misunderstanding what this whole thread is about. It's not about voices or polyphony. We're discussing an inherent workflow issue on the Snow. Having access to more than 4 channels of MIDI would prevent users from having to deal with saving out patches, erasing automation, or having to render MIDI to audio frequently. If I have to mute a channel to free up voices so I can continue writing and allowing inspiration to flow, it's a lot easier than having to break from that moment of inspiration and creativity to bounce out audio when I may not be ready, or replace automation on that channel.. Having those sorts of limitations can slow down creative workflow.
Now if there is a workaround or something that I'm unfamiliar with, I'm open to hearing about it. But so far, the only solution I'm seeing is 'buy the ti2 desktop.'
No I do understand what your saying, because I have the virus ti snow and there is one thing that is a bit annoying is that you only have 4 parts, and in this day in age a synth that is this expensive and with so much polyphony, I think atleast 8 parts multi timbral should be access. Just to make production with the synth more able, but access promote this synth as a performance synth not a production synth, but being that it has the same engine as its big brother only with 1 d.s.p. chip, I believe this synth should be more accessible to those, that cannot make it to the Desktop version with all the knobs etc etc. With less parts like 8 atleast, is more than enough what we ask for. plus the desktop version its a big big to lug around with all those knobs to do a live set, plus you do no want to take a synth like this to an open air festival to perform where there is always a dust cloud from people stomping their feet. I bet if access listen to their clients more the product would have much better improvement, something that could become the standard in synth which is already but it could be the industry standard and its a win win for them more people with their product line and it would be the innovation to others to keep up with access technology.