Beiträge von Gmoll

Hi. I'm playing synths since the beginning of the 80's. This is a long time now and I really had a lot of different units.
But, my TI keyboard is the first that produces ghost notes. I had this on my last gig with a very huge PA. Nice experience ...

Due to my job (electronic engineer) I do not believe that only a flat surface is the right one for playing Virus.
I'm really pissed because I was playing a Rack XL for many years and it was working quite fine. It also was the reason for
buying another access product again. Now after transferring all sound to the new synth such a thing happens.

Access, please find a solution.

Hi flabberbob

I started with Multi 01.
When starting with Multi 16 everything is possible. Thanx.

BUT: I'm really disappointed by the actual manual.
There are so many things missing or incomplete.
When using my RACK XL I really was glad to have a good manual, I miss all that.
For anybody who is using the TI as a standalone unit ........

Michael

I tried everything as suggested, but I still did not reach my destination.

Config Settings:
Global channel 1
Midi Dev ID 1
Local on
Mode Multi channels
Soft knob 1 Delay Depth
Mode single
Soft knob 3 Off
Mode single
Soft knob 1 Off
Mode single

Single sound A no soft knob
Single sound B no soft knob
Single sound C soft knob 1 set to Effect send (Reverb) soft knob 1 set to Off soft knob 1 set to Off

Multi
First three parts are used (sounds ABC) all others are off
Sounds are not overlapping

I'm just playing with the keyboard, no ext sequenzer shall be used.

Ok, settings are done, I try to store the Multi to e.g. RAM 20:
Button STORE
Destination RAM (selecting with soft knob 1)
Patch No. 20 (selecting with soft knob 2 or 3, both are usable)
Display shows on line 1: Press STORE to execute
Pressing button STORE now: nothing happens

If this is done with e.g. Destination RAM 12 the Display changes to a window where name can be changed
and after pressing STORE again the Multi was stored (Display: Multi stored)

I tried a dozens of things, but at my synth it is not possible to store a multi on places 16 to 127.

I need a lot of multis for my stage setup and therefore places 00 to 15 are not enough.
Nevertheless 16 to 127 also should work.
Where is the fault?

After storing my multi to place 12 for example the display shows:
MULTI mysound 01
12 mysound
REVERB REVERB

As you can see, the third line shows REVERB two times.
Regarding the config settings above just soft knob 1 is set to Delay depth.
Why do I get two times REVERB?

I have got the latest OS and all the settings are as described.
What do I make wrong?
Do other user also know that facts?

Michael

Hi everybody,

I was using the Rack XL for many years and now bought a TI2 keyboard.
Working some days with the machine I now know the a Multi is a little bit different than it was in the XL.

I wanna do the follwing:

I have three single sounds (already edited and stored), call it A, B and C.
Sound C can be changed using the three soft knobs, A and B are unchangeable.
Now I want to create a Multi which will be stored at no. 20 (not 00 to 15 !).
Still sound C should be changeable with knobs below the LCD.

Can anybody explain step by step?

Thanks, Michael