Good day,
I've tried searching around for additional Virus Ti2 remote control templates for VST soft synths. According to the manual they are downloadable on the website, however I've had no luck tracking them down. Could someone possibly point me in the right direction?
I was hoping to find some templates for common soft synths such as Sylenth etc.
Best regards
On the oscillator window you can try setting the "phase init" knob to about 30 or above and it might fix the crackling issue. It depends on what patch you're programming but when I was doing bass patches I noticed that doing so fixes it.
Hi guys,
Thanks for your feedback! Psylence - no. I normally leave my PC idling with the virus connected for days on end.
I think its possible you are correct about the power issue. I'm feeding power for my monitors, screen, virus and PC all from the same wall socket using a surge protected multi-plug adapter. I had issues before and was advised to purchase a powered USB hub for connecting the USB cable to my computer. I will consider testing the adapter if the problem persists...
Have a great day!
"Your Virus TI is up to date.
Currently installed version: 5.1.1.0
Will update to: 5.1.1.0"
I have reinstalled the OS and will see if the problem persists. If I get the sound again I will make a recording of it and send it through together with my problem description to Access Support. I hope it doesn't do it because its a damn terrible noise!
If anyone has any other ideas I am open to suggestions in the mean time.
Hi Stache,
Thank you for getting back to me. I'm using Windows 7. I'm at work currently... I have a suspicion that I'm running the latest update but hopefully I'm wrong. Will check as soon as I get home and reply to this read/access support.
Good day,
I'm using my Darkstar as my interface and its been working perfectly but I've encountered a strange problem. My virus seems to go off randomly (display blanks out) and I get this loopy siren noise coming from my speakers. It does not happen often but its quite disturbing. Its been happening at night and I tend to stumble out of bed to run and switch my monitors off to get rid of the noise. If I switch them back on the noise is still there. Only when I remove the virus' power cable does the noise disappear. When I reinsert the power cable it only powers on after the 3rd or 4th attempt and everything seems to be back to normal. Anyone have any idea what might be causing this?
Good day,
I recently upgraded my OS to Windows 10 64-bit from Windows 7 and I've been experiencing some difficulties with my Virus. My mod and pitch wheel are not functioning correctly and sometimes my midi notes freeze and play continuously. I also had difficulty selecting the correct buffer size and ended up switching from my Focusrite 2i4 sound card to using the Virus itself as a my interface.
My setup:
Workstation: Cubase 8
Sample rate and bit depth of 24bit, 44100 Hz.
Buffer size: 256 Samples
I think I have exhausted the variations of these options as well as trying different USB ports on my PC. I made sure that my Virus is running the latest drivers and have restarted my pc several times. I also reset the virus to factory defaults via the control center, all to no avail. I think it may still be a USB issue due toe some kind of conflict or perhaps my motherboards USB ports. I noticed that after changing my OS my mouse did not want to work correctly either.
Any other suggestions would be much appreciated! =)
