Beiträge von skydan

    Here is Bugcheck Analysis from Texas Instruments Technical Support:


    *******************************************************************************
    * *
    * Bugcheck Analysis *
    * *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck D1, {fffffa8055a00018, 2, 0, fffff8800ae2ecb1}

    *** WARNING: Unable to verify timestamp for VirusUSB.sys
    *** ERROR: Module load completed but symbols could not be loaded for VirusUSB.sys
    *** WARNING: Unable to verify timestamp for tihub3.sys
    *** ERROR: Module load completed but symbols could not be loaded for tihub3.sys
    Probably caused by : VirusUSB.sys ( VirusUSB+2ecb1 )

    Followup: MachineOwner
    ---------

    0: kd> !analyze -v
    *******************************************************************************
    * *
    * Bugcheck Analysis *
    * *
    *******************************************************************************

    DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
    An attempt was made to access a pageable (or completely invalid) address at an
    interrupt request level (IRQL) that is too high. This is usually
    caused by drivers using improper addresses.
    If kernel debugger is available get stack backtrace.
    Arguments:
    Arg1: fffffa8055a00018, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
    Arg4: fffff8800ae2ecb1, address which referenced memory

    Debugging Details:
    ------------------
    READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032b8100
    GetUlongFromAddress: unable to read from fffff800032b81c0
    fffffa8055a00018 Nonpaged pool
    CURRENT_IRQL: 2
    FAULTING_IP:
    VirusUSB+2ecb1
    fffff880`0ae2ecb1 ?? ???
    CUSTOMER_CRASH_COUNT: 1
    DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
    BUGCHECK_STR: 0xD1
    PROCESS_NAME: System


    ANALYSIS_VERSION: 6.3.9456.0 (debuggers(dbg).130703-2335) x86fre

    TRAP_FRAME: fffff88006bfe450 -- (.trap 0xfffff88006bfe450)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=fffffa80200a5c60 rbx=0000000000000000 rcx=fffffa801f6c6270
    rdx=0000000036339da0 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff8800ae2ecb1 rsp=fffff88006bfe5e0 rbp=0000000000000000
    r8=fffffa801fc33650 r9=0000000000000030 r10=fffff8000300b000
    r11=fffff88006bfe728 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0 nv up ei pl nz na po nc
    VirusUSB+0x2ecb1:
    fffff880`0ae2ecb1 ?? ???
    Resetting default scope
    LAST_CONTROL_TRANSFER: from fffff800030801a9 to fffff80003080c00
    STACK_TEXT:
    fffff880`06bfe308 fffff800`030801a9 : 00000000`0000000a fffffa80`55a00018 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
    fffff880`06bfe310 fffff800`0307ee20 : fffffa80`200a5e9b fffffa80`200a5c60 fffffa80`200a5c60 fffffa80`200a5e9b : nt!KiBugCheckDispatch+0x69
    fffff880`06bfe450 fffff880`0ae2ecb1 : fffff880`01b19ced fffff880`06bfe630 fffff880`0a33e890 fffff880`0ae2fd9c : nt!KiPageFault+0x260
    fffff880`06bfe5e0 fffff880`01b19ced : fffff880`06bfe630 fffff880`0a33e890 fffff880`0ae2fd9c fffffa80`20e073b0 : VirusUSB+0x2ecb1
    fffff880`06bfe5e8 fffff880`06bfe630 : fffff880`0a33e890 fffff880`0ae2fd9c fffffa80`20e073b0 fffffa80`200a5c60 : cng!g_AesCtrSafeCtx <PERF> (cng+0x6aced)
    fffff880`06bfe5f0 fffff880`0a33e890 : fffff880`0ae2fd9c fffffa80`20e073b0 fffffa80`200a5c60 fffff880`0a350940 : 0xfffff880`06bfe630
    fffff880`06bfe5f8 fffff880`0ae2fd9c : fffffa80`20e073b0 fffffa80`200a5c60 fffff880`0a350940 fffff880`06bfe798 : tihub3+0x45890
    fffff880`06bfe600 fffffa80`20e073b0 : fffffa80`200a5c60 fffff880`0a350940 fffff880`06bfe798 fffffa80`20e07370 : VirusUSB+0x2fd9c
    fffff880`06bfe608 fffffa80`200a5c60 : fffff880`0a350940 fffff880`06bfe798 fffffa80`20e07370 fffffa80`1fc33650 : 0xfffffa80`20e073b0
    fffff880`06bfe610 fffff880`0a350940 : fffff880`06bfe798 fffffa80`20e07370 fffffa80`1fc33650 00000000`00000000 : 0xfffffa80`200a5c60
    fffff880`06bfe618 fffff880`06bfe798 : fffffa80`20e07370 fffffa80`1fc33650 00000000`00000000 fffff800`030845c1 : tihub3+0x57940
    fffff880`06bfe620 fffffa80`20e07370 : fffffa80`1fc33650 00000000`00000000 fffff800`030845c1 00000000`00000000 : 0xfffff880`06bfe798
    fffff880`06bfe628 fffffa80`1fc33650 : 00000000`00000000 fffff800`030845c1 00000000`00000000 fffffa80`200a5c60 : 0xfffffa80`20e07370
    fffff880`06bfe630 00000000`00000000 : fffff800`030845c1 00000000`00000000 fffffa80`200a5c60 fffffa80`1fc33650 : 0xfffffa80`1fc33650


    STACK_COMMAND: kb

    FOLLOWUP_IP:
    VirusUSB+2ecb1
    fffff880`0ae2ecb1 ?? ???

    SYMBOL_STACK_INDEX: 3
    SYMBOL_NAME: VirusUSB+2ecb1
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: VirusUSB
    IMAGE_NAME: VirusUSB.sys
    DEBUG_FLR_IMAGE_TIMESTAMP: 50116785
    FAILURE_BUCKET_ID: X64_0xD1_VirusUSB+2ecb1
    BUCKET_ID: X64_0xD1_VirusUSB+2ecb1
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:x64_0xd1_virususb+2ecb1
    FAILURE_ID_HASH: {62c24f18-58b4-2dd6-4fd1-2e115a2e25ad}
    Followup: MachineOwner

    Hello everybody.


    I have a problems with my Silverstone EC-04 USB3 PCI-e card (TUSB7340 Hostchip) and Access Virus TI2.


    Steps I’ve made:
    1. Install OS Windows 7 x64 with latest drivers for motherboard chipset (X79), onboard USB3 controller (ASMedia 104x), and latest drivers for TUSB7340
    2. Install Virus Software 4.0.3 without connecting Virus to TUSB7340
    3. Reboot
    4. Connect Virus TI2 to TUSB7340
    5. Windows 7 x64 detected a new device and install both Midi and Audio drivers for Virus TI2
    6. When I go to the Device Manager I see that Midi driver is not installed correctly, instead of “Virus MIDI Driver” I see “MIDI Device”
    7. Starting Cubase 6.5 and see that Virus TI2 not reacting to keystrokes
    8. When I manually install MIDI driver for VirusTI2 I have a BSOD
    9. After that when starting Cubase 6.5 during MIDI initialization I have a BSOD
    10. When Windows 7 x64 starts up and Virus TI2 connected to TUSB7340 I have a BSOD
    11. Windows 7 x64 boot up normally only if Virus TI2 disconnected from TUSB7340


    I have contacted with Texas Instruments Technical Support and Access Music Support both.
    First of all, Access Music Support says that this problem is caused by both Virus TI2 drivers and TUSB7340 drivers – it is evident from the Dumps.
    Ок, I have get in touch with TUSB7340 manufacturer (Texas Instruments). Texas Instruments confirmed the presence of such a problem and give me a new fixed driver for TUSB7340. But the situation has not changed. I sent the new Dumps to the manufacturer.


    After analysis of new Dumps Texas Instruments Technical Support says that:
    «Taking a look to the attached Memory Dumps it’s pointing that the problem is caused by the VirusUSB.sys driver and not by the TI driver. The warning and errors displayed that make reference to the tihub3.sys driver are only because you have not the driver symbols loaded on your system. (those symbols are only for debug purposes)»
    Bugcheck Analysis of new Dumps is attached to this post.


    Question to Access Music Technical Support:
    1. Is it possible to make work fine Virus TI2 and TUSB7340 USB3 Hostchip?
    2. Can Access Music fix this problem in the next version of Virus TI2 drivers or I need a new USB controller?


    Dumps with fixed TUSB7340 driver

    Hello. Thanks Access Music for support.


    1. Is it possible to make some backgrounds of VC little more darker? Like on my images? I think it would be usefull for easy reading of text.


    [Blockierte Grafik: http://img149.imageshack.us/img149/6475/gui1b.jpg]
    Uploaded with ImageShack.us


    2. When rotating filters - something glitching in filter window:


    File Name: VC_glitching.rar
    Size: 587.56KB | http://www.sendspace.com/file/1lbo5z



    Thanks!