Posts by klaiping

GESchwalm,

Thanks for the suggestion. You are correct, it is a TI, not TI2. I'm confident i found the "contrast" setting using your suggestions. I found the CPU Lux parameter - turning knob 1, i could adjust the brightness of the LEDs. Hitting parameter one more time to the left should have LCD contrast on knob 1. Unfortunately it didn't do anything. I am pretty sure the LCD is faulty now.

From reference manual:

LED Lux

0 to 127: Brightness of all LEDs.

BPM LED Brightness

0% to 100%: Relative brightness of the BPM LED.

LED Mode

Specifies what the multi purpose BPM/LFO LED will indicate.

LCD Contrast

0 to 127: Optimize the display for different viewing angles.

Mem Protect

Really hard to see anything in the config menu if the LCD's not working

Hello,

Any suggestions on how to fix this? Does the LCD need to be replaced?

Update... Thanks for the replies ... it now works... make sure the USB is unplugged

Yep... That is the first thing I tried... I can get it to work when using a computer to route the midi in (Virus TI Midi) ---> Computer --> USB (Virus TI Synth). I am trying not to use the computer

Hello,

How can I trigger the Virus TI KB from a HW Sequencer without USB or Computer ? My understanding is that the MIDI jacks act as the MIDI Interface (Virus TI MIDI) and bypasses the sound engine. Can I route the MIDI In jack to the sound engine (Virus TI Synth)?

I am running OS 4.5.3

Thanks in advance

How do you trigger the other channels in the VC plugin?

Tom,

"To have full control of some of the sounds, e.g 3 stereo outputs, click the '+' symbol of the virus channel strip in logic, this will open up 2 of its AUX channels - virus 3-4 and virus 5-6. You know how 3 stereo outputs, and can still use the other 13 parts"

How do I add virus 3-4 and virus 5-6. When I click the '+' symbol I only get the options for input 1-2 and bus? '
'
Thanks in advance

Hi,

Does anyone know how to route USB 1 and 2 outputs from the Virus to different Channel Strips in Logic. I would like to route the Virus's analog inputs to USB 2 and the internal timbres to USB1.

Thanks