that was it
tx bob
that was it
tx bob
no I did not install new USB device
I will reinstall the virus drivers
tx
let you know
Since few days, no virus can be found.
I don't remember how that's happened.
I am on PC via cubase 5
1/ when I add a midi track with virus ti inside, an alert screen says :
"no virus ti can be found
please proceed as following:
-remove all cables ...
- 30 sec
- hold arp edit key ...
- until the unit rebooted...
- plug usb cable..."
what I have done. and always the same alert screen.
2/ when I run the virus control center
same thing. I follow the process, then the vius is found by virus control center
I turn off the virus control center then the virus ti turn off then on
I go to cubase, add a midi track with virus ti
and one more time, the same alert screen
3/change the usb cable, nothing changes
4/ change the usb port, nothing changes
5/ for a later issue, VolDeeman said to do this "In your host in i/o devices menu select Virus USB Audio Driver, change
the buffer size to 128 samples + safety buffer and then you can choose
the ASIO device you usually use. "
and that have fixed the problem (tx to him)
Here, nothing changes
Can you please help me to fix this issue???
well done
thanks mate
tried with another usb cable, nothing changes
I have contacted the support today, waiting news from them
tx to flabberbob and voldeeman
last thing to do : contact the support ???
flabberbob : I tried with fl studio 10 and does not work well, when i bought the virus I tried with fl studio which is my next daw and never works good. but I will try again
VolDeeman : The virus is plugged in the computer that runs with a motu sound card ultralite mk3 hybrid. everything work well with the card but I will looking for update
tx guys
I checked the sound via headphone yet and it sounds good
tx flabberbob
factory restore does not change anything too
could it be a problem with my cubase?
How can I check if it is?
So
I have unplugged the cable power, then push the button "edit" of arp section then replug the cable power while
keeping pressed the buttons "edit" for several seconds
Nothing changes
this morning, I have downgrade then test
nothing changes
anyone can help me?
nothing changes.
I have unplugged the cable power, then push the 2 buttons "edit" and "arp" together for several seconds then replug the cable power while keeping pressed the 2 buttons "edit" and "arp"
is that the good way?
I will try to downgrade then upgrade
No, i didn't.
will try that way
tx
Hi!
Last week, I was working in cubase with my virus TI polar.
2 years without problem, but this time has changed.
My Virus is plugged by usb. I work all the time with the virus plug in.
When I play, I have a weird sound. I can change preset via ram bank and personal libraries but I have always this weird sound
I tried to re update, nothing changes
I tried to De install then re install, nothing changes
I tried another plug in with the virus as midi controller and it runs well
I don't remember, what I did when it arrives.
Can you help me?
héhé
discover new thinngs every day
so i can work with the 3 outs which appear when I click on the " little arrow thing by the right of the "e".", then choose which outs i want to use for the instrument.
tx for taking some of your time to help me.
why in the common page, in OUTPUT and MAIN OUT, the usb3 L+R is closed. i can't use it
hi
tx to help me,
yes i have clicked on the " little arrow thing by the right of the "e", click on this then activate all outputs."
then i see the OUT1, OUT2 and OUT3 in the mixer.
I have 4 instruments (via the virus control) and i want to put different eq on each one.
the sound comes from the out1.
i suppose, i can't do what i want. snif lol
i will bounce each new thing i do
ahah
tx for your reponses
in fact it's not what i want to do lol
.
for the moment, i have just a track called "out 1", on which one I can put FX. but this track regroups the 16 instruments of the virus ti
I want in my mixer, each 16 differents instruments to mix down or put fx on each ones
is it possible?
hi
i am new here.
i am on cubase 5.
is there a way to have the 16 splitted virus tracks in the mixer of cubase.
now, i can see just a track called OUT 1;