I can confirm this.
The only way to make digital audio out from the Virus TI2 without sync issues was to do the following:
1. The virus hast to be the master clock (set it to internal)
2. Your audio interface has to be the slave
3. Your system has to be running on 48khz (Both the Virus + Your audio interface)
4. Connect the virus via SP/DIF to your audio interfaec
5. Midi can go both on 5-pin DIN or USB, irrelevant
Everything will work fine.
Things what didn't work:
1. 44.1khz - constant crackling, clicky noises
2. Audio interface master clock / virus slave -> constant crackling, clicky noises.
I hope this helps
So give the VC another try: You already have established the solution: Audio Clocking via SPDIF resolved the Problem of "out of sync" issues. I don't know at what sample rate you use the Virus with what kind of audiointerface, but check first (that means before launching LPX) the audiomidi app (sample rates are shown there) in your System, they should be equal (found out that some weird ways of influence my monitor had, set at 48kHz instead of 44kHz). LPX should be set to the same sample rate. So my interface is set in "slave" mode and also connected via SPDIF with the Virus TI2. The Virus accepts only 44,1 or 48 as far as i
I ran a short cycle/loop (with a little complex notevariation at the end oft he cycle) with the "Banj Arp" Patch and the metronom for over 1 hour. The syncing with the Metronom was perfect.
just a thought if your still on Mojave…
