To anyone having this issue!
Resolution: Check Config setting under INPUTS 1/2 and change the sensitivity from -16 to +16.
Adjust to this and you should be good to go. You may need to raise the gain on your interface and the volume up on the virus but you will not get noise at +16 on the input sensitivity.
To get to EDIT CONFIG: Look at the buttons to the left of the ti2 display. Second row down, second button from the left.
EDIT CONFIG > Inputs 1/2
| Sensitivity | Boost |
| +16 | off |
I know what your thinking. My issue is with the output. I know mine was too but the input sensitivity was creating the noise. This method resolved the issue immediately with out losing the ability to turn it up. I think I had accidentally changed in. You guys might have or maybe it happened during an update but check that setting. I also have the boost setting off, same page.
I believe this due to the proximity of the input to the first output and may be why 2 and 3 are not affected.
Good luck everyone!!!