Hello, tell me where in the virus ti plug-in - I need the signal to be fed to both channels on the balance, because there are sounds with a preponderance to one of the channels ... and thus from one channel plays louder than from the other! write or attach screen - to see - thanks!
Here is an example of an error and how to make a balance?
https://ibb.co/kUHVBL
how to equalize the signal on both channels
-
-
In the VC plugin, you have a list of all parts on the left part of the window. There is a volume slider, and a pan knob for each part. You can use that pan knob to change the stereo balance for each sound.
However, some sounds use dynamic panning in one way or another, or are very wide and therefore difficult to balance properly. For those sound, you should consider changing the panning within the sound itself. There are several factors which influence panning, first of all there's the Pan parameter of the patch, which interacts with the Unison spread and Split Filter mode. Additional, certain effects such as Chorus, Filterbank and Stereo Delay may also change how the stereo image is perceived.
Check all those parameters and read up in the reference manual about those settings.
-
Thankful. I will consider in detail the functions and the recommendation given by you!