Exit USB Mode

    Hello,


    Is there a way to exit USB mode that does not involve connecting the TI2 via USB to a computer?


    Steps to reproduce the USB mode problem:

    • Power on TI2
    • Connect TI2 to computer via USB
    • Use TI editor in DAW..
    • Power down TI2 (without disconnecting from DAW/TI first)
    • Go to show.. (I have no computer on the road)
    • Power on TI2
    • Freak out! Cannot make sound, because Virus TI2 is stuck in USB mode.

    Only way I know how to exit USB mode

    • Power on TI2
    • Plug into any computer via USB (no drivers required)
    • Un-plug from computer
    • USB mode exited.

    Switching Local to "On" is a work around, but not a solution to exiting USB mode.


    Thanks!
    Perry

    Zitat von Marc

    i'm not sure what you're doing here


    OK. I will do that. The issue is intermittent. Here are the steps to reproduce.

    • Power on TI2
    • Connect TI2 to computer via USB
    • Do not disconnect the TI2 from USB
    • Power off TI2
    • Power on TI2 (still disconnected from USB)
    • USB mode is sometimes still active, and I cannot make sound.

    Meanwhile, is there a way to manually disengage from USB mode?