Posts by themachine

I am using FL 20.1

And latest Virus TI Software Suite 5.1.7.00 64-bit

It started to happen quite long ago, but i dont use virus that much often so didnt really care that much. But a year ago, probably even more.

I tried various things to solve it, nothing helped. Only thing comes to my mind, there is something happening with vst3 version itself that isnt compatible with FL Studio, i know only 1 other plugin with same behaviour is Izotope/Exponential Audio R2. It also sometimes loads and sometimes not.

Cant do printscreen now, but settings are the same as any default vst plugin. But that doesnt matter since the problem is with random plugin crashing inside FL Studio

Quote from Toxicatorz

I fixed it by downloading the software suite installer and removing everything completely and reinstalled it. was pretty fast and didn't need to update the firmware as it's the latest already, I'd recommend you that

Unfortunetly it did not fixed your issue, trust me on this, i have tried, its more of a conienciendnce, crashes will be back 100%.

Yesterday i spoked with a friend, he is also expierience this random crashing/not working but on Mac OS and Cubase.

I have a problem with Virus ti snow plugin inside FL Studio

When i open it works fine, but just randomly it can stop working, or upon opening the project i get this message in the plugin wrapper (latest vst version, 64bit) and virus doesnt open in FL studio entirely until i open the plugin inside some other host.

I have exactly the same issue.

My solution to this, open in other host VSTI plugin (it works in Studio one) or Komplete Kontrol and then again try to open in FL it should work. Mind you that after some time plugin will stop working again.

Also forgot to add the following:

3. It is quite offten plugin editor crashes and after loading the project again i get an error that plugin failed to load resulting in a broken project. To fix i have to search for older project version (if saved) save the patches i used and load the plugin in broken project and load the patches.

Since last year Windows 10 have been rolling creators update and Virus Ti Snow started to missbehave more often:

1. More often out of sync errors
2. In every session i use virus ti after some time even with 1 patch going virus ti snow plugin just does not produce any sound and always stuck on sync error

Just a note

So i recently got an updated for Windows 10 called Creators update, i wished i didnt installed because i cant roll it back.

After installing it i started to get alot more out of sync errors and whats worse after those i get permentant mute, i have to reload the project im working on in the daw to virus make the sound again. Its a nightmare to work. I have tried reinstalling virus, no help

hopefuly Access Music will release new drivers. For the rest, do not update Windows 10.

Im using Virus Ti Snow, Windows 10 Home Premium 64 Bit, FL Studio 12.4.2

So my PSU of Virus ti snow broke, and i want to replace it. IT shows that output is 13.5v and 2.5a, Does it nesecerely mean it has to be 13.5v ? or can it be simple 12v output PSU?

An update:

after switching back from macbook to windows, it magicly started to connect with Virus Control, but not the Plugin.

What can be the problem?

Previous days i worked with virus and it worked alright, i did not changed anything in my system. Yesterday i turned on Virus TI and a message apeared "No virus ti connected".

I did various thing to make it work, changed USB cables, switched USB ports, disconnected all other usb devices. It was always showing that USB connection is established, i was able to send MIDI data via USB and send audio via analog cables, but there still was no connection with Virus Control. Then for some odd unexplainable reason it started to connect to Virus Control.

Ok, so i turned virus today, and the same message apeared, i did tried all the things yesterday i did, aswel i tried taking out power cabel and turn it on while holding tap tempo. It just doesnt connect to virus control. I did try to reinstall the latest software aswel. Im using Windows 7 64bit.

I dont know what else to do anymore.

Futhermore, i have a Macbook air and Virus Ti Seem to connect there with Virus Control

[Blocked Image: http://s16.postimg.org/40u6wcrhh/virus.jpg]

Todays machine power and advance in dsp technologies are very advanced that was years ago. The sound quality and features of VST instruments are already on par on hardware and even surpasses it. Just to name few examples U-He Diva, Bazille, Hive, Tyrell 6 Synapse Dune 2, Reveal Sound Spire, Xfer Records Serum and so on. Virus TI is great, but because of the hardware limitations like not being able to run properly over 512ms, 4 parts, polyphony limit, not able to render instantly, latency limitations in FL...i rarely turn on Virus, i do sometimes but only just for ease of use because i have made quite an ammount of patches.

Randomly turns on Oscilator 3 with Wave 61 in it

Im using FL Studio 11.1 64/32 bi (tried both)

Using latest Virus Ti OS 5 and later on updated to the latest Beta version. Doesnt solve the problem.

thank you Access Music for not solving the problem and therefore im not able to use virus for almost 2 months!

thank you Access!

I have identified what happens, it seems when i turn on lower keys or play in chords, for some reason Virus change preset''s 3rd oscilator waveform to wave 61

any advice?

[Blocked Image: http://i60.tinypic.com/2ajxvh5.jpg]

Its really irritating, i cannot use my virus. Here is an audio example what happens with the sound. Link bellow:

https://www.dropbox.com/s/bef2…/virus%20ti%20problem.wav

First i play melody with muted bottom keys, in second melody pattern repeat i unmute and you can clearly hear the sound becomes like resonant, then i mute again same keys and the sound is still the same. I have to re-load the patch (4th repeat of the melody) and then it sounds good.

Please fix this, or at least give some response you have noticed this topic

Ok it seems to be a problem, because i get same bugs with OS 5.0.3

I tried to downgrade to os4, but after downgrade virus control doesnt seem to find virus. It says i have version mismatch, but in virus control shows that all is at it seem to be.

In this state my virus is not usable anymore.

Please help me to solve the problem.

Hi,

some time ago in stalled latest firmware for my Virus Ti Snow and i came in to couple of problems.

1. Latency is not constant anymore on all USB Audio Outs.
2. The sound become resonant/phased without apearant reason on all patches. It plays normal, then all of suden the sound is different.

I reverted back to previous version, seemed to be ok. Installed again latest version 5.0.8.00 and problems are back.

Im using Windows 8 64bit
FL Studio 11.1
Focusrite Saffire Pro 24

I recently updated to the latest virus OS and i have noticed alot of sounds have this weird distortion on high frequencies.

Does anyone noticed ? check especialy the sounds that are using unison + detuning

I think its time for access to consider making a vst plugin version of virus or at least something new

http://www.reveal-sound.com/

It blew my mind, it really captures similar character as Virus TI, really it does. Just download demo, try some patches, try to program some

And the unison sounds awesome

http://www.youtube.com/watch?v=cx_02tEHpK8#t=35