I tried everything as suggested, but I still did not reach my destination.
Config Settings:
Global channel 1
Midi Dev ID 1
Local on
Mode Multi channels
Soft knob 1 Delay Depth
Mode single
Soft knob 3 Off
Mode single
Soft knob 1 Off
Mode single
Single sound A no soft knob
Single sound B no soft knob
Single sound C soft knob 1 set to Effect send (Reverb) soft knob 1 set to Off soft knob 1 set to Off
Multi
First three parts are used (sounds ABC) all others are off
Sounds are not overlapping
I'm just playing with the keyboard, no ext sequenzer shall be used.
Ok, settings are done, I try to store the Multi to e.g. RAM 20:
Button STORE
Destination RAM (selecting with soft knob 1)
Patch No. 20 (selecting with soft knob 2 or 3, both are usable)
Display shows on line 1: Press STORE to execute
Pressing button STORE now: nothing happens
If this is done with e.g. Destination RAM 12 the Display changes to a window where name can be changed
and after pressing STORE again the Multi was stored (Display: Multi stored)
I tried a dozens of things, but at my synth it is not possible to store a multi on places 16 to 127.
I need a lot of multis for my stage setup and therefore places 00 to 15 are not enough.
Nevertheless 16 to 127 also should work.
Where is the fault?
After storing my multi to place 12 for example the display shows:
MULTI mysound 01
12 mysound
REVERB REVERB
As you can see, the third line shows REVERB two times.
Regarding the config settings above just soft knob 1 is set to Delay depth.
Why do I get two times REVERB?
I have got the latest OS and all the settings are as described.
What do I make wrong?
Do other user also know that facts?
Michael