This last weekend while using the Virus I had some major issues;
The virus is running the latest OS 4.0.5.
I am not using any USB connection, only MIDI and analog audio out and in.
On Saturday I ran audio into the Virus inputs to atomize and the virus almost immediately put random white noise through the outputs. If I turned the main output volume knob down it made no difference. If I unplugged the 1/4" outs from the virus, the input was removed from my digi 003 system producing no noise.
I then took the keyboard out of atomizer mode and the single patch mode would not let me change patches at all. Stuck on a patch. Flipped to multi mode and then able to change patches.
I then performed a factory reset and the keyboard was able to change patches again.
Sunday, I ran into the same issue of the atomizer noise, however I was forced to turn the keyboard off completely as it was jammed up with no button producing any change of mode or operation. I turned the keyboard off on Sunday and I have not touched it since.
Please advise your Access representative of these issues. I will be happy to answer any questions.
Sincerely,
Alan Ruby
608.225.2242