Hi.
I have a Virus TI Keyboard.
These requests are based on the Multi-mode settings: Part Enable, Keyboard to MIDI and the System setting: Mode (One Channel, Multi Channels).
1.
The Keyboard to MIDI feature only works when the Virus TI is set to multi channel-mode.
In single-channel mode the keyboard always outputs to MIDI.
Would it be possible to make the Keyboard to MIDI option work in single channel mode?
2.
When in multi-channel mode, the Part Enable On option enables the keyboard to control that channel.
If you want to play one channel from the keyboard and have a sequencer play another channel, it is not possible in multi-channel mode, as setting Part Enable setting to Off on a channel also means that that channel will not respond to MIDI messages.
Would it be possible to either allow Part Enable Off channels to respond to MIDI messages or have a new Input from MIDI (On, Off) setting on each channel.
I hope this makes sense,
Paul