Yes
Pardon. Only in CLASSIC WAVE you can change it:
in the OSC, you need to be in MODE of your "wave" in "CLASSIC "(not the others "HyperSaw, Wavetable, PWM, Grain.....)
Yes
Pardon. Only in CLASSIC WAVE you can change it:
in the OSC, you need to be in MODE of your "wave" in "CLASSIC "(not the others "HyperSaw, Wavetable, PWM, Grain.....)
Test this manipulation for see:
- Switch off the TI, disconnect the power supply.
- Plug it back in.
- Switch on the TI with "EDIT" (to the left of ARP ON): it will not erase anything, but will automatically bridge you to the "ROM-A 0" bank.
- The temporary memory is emptied and the message "Globally Disable" will no longer be displayed. Phew
In section of OSCILLATORS:
EDIT / sellect OSC1/ EDIT(x2) = "Common 1/2" / "<" (with PRMETERS) = Sub Oscillator"/ "Shape" = Square or triangle
Yes good idea
i d'ont use USB for audio. Only OUTPUT AUDIO-1 (RIGTH+LEFT) whith my Sound-card and USB for MIDI (in/out) with convector
Yes everydays, on Mac M1 Ventura in AU or in my DAW: it's essential
Does anyone know if all of my saved sounds / patches from my Virus T>I desktop will load through the :
Access Virus Editor and Librarian plugin from Aura?
Please help, thanks in advance
Yes if you have somes .mid
Your only solution is to ask a person who has the SNOW + AURA, to do this conversion (from .backup to .mid)
and then, these .mid will load them one by one in AURA whith the M1
NOTE: I always use AURA to save (and repatriate) my BANKS (all in .mid) It's like on the patch sites, they sell them in .mid
In fact I no longer do .backup (of Control virus) only if I want to burn some of the ROMs of my sounds and
for this I charge .mid (build by fAURA) It's possible
Oh, those are not the Library files of the Virus Control Plugin but hardware backup files of Virus Control Center. I’m not sure, but I wouldn’t expect to be able to restore a Snow backup to a TI2 since they have a differing internal memory structure. IIRC, the Snow stores only 64 presets per bank, while the TI2 stores 128.
Oups exactly:
Oh
So: the format . ti2backup AURA does not take them! it needs .mid or .sys
You would have to load each backup (one by one) in the TI (with Catalina) then, connect the TI with AURA, then Aura will read all the RAM and ROM and from there, you export them in .mid (bank edit/ store/ ……….mid) to have them in "universal"
It's really a shame! Because I'm on M1 (Vntura) minimac and it works at 100/100 since April 2022 in version 3.00 If you want, I can see to help you where the problem comes from
It must be plugged into a MIDI cable (converter: Usb>Midi) to use it in AU
And in a DAW there is the choice: Direct Usb> usb or USB cable> midi
you have AURA here; https://auraplugins.com/product/access-virus-editor the last version is ok
The great thing with using both filters is that you get two resonance peaks, which can create some vocal characteristics. Especially when modulating both filter cutoffs independently.
At the beginning I was destabilized, with the matrix of the 2 filters (FILTER section) Then in fact to obtain what you say, it is necessary to be in Routing "Parallel + Link "off" (EDIT/ "common 1/2") I used a lot on other places where there are other filters (OTHERS or OSC VOLUME)
Whao, exellent !!! The kicks Hardstyle Thanks. Good job, just Env+Pitchs verry original your idea... i work in evolution of your patch with new automations...
I used for second life, the plug-in NUMBLE about one sample of TI. Do you know it?
Yes, SELLECT LFO1/ EDIT/ go to "Shape" (in menu "LFO1 1/3")/ Turn "VALU 3" = Sine,Triangle... Wave 3>64
Hi
so, no, on the other hand in the choice of SHAPE, there are those of CSOs, there are 64. The No: 16, it's going to get closer, especially in RATE between 120/127. What I use. Also, you have another fonction (only on OSC 2): introduce "Noise" with the FM AMOUT (only on the "Classic" waveforms) = SHIFT+FM AMOUT/ find the "Noise" value (between wave and inL)
Hello
I used in the past the Groovebox 303 from memory it is not (original) all midi. For the TI, unfortunately you will discover that in MULTI or SEQ mode above 5 tracks, if you play with chords here and there it does what you describe. You can use MULTI a little to overcome it: choose "HIGTH" and not "LOW" (= SHIFT+EDIT\ Priority)