Hi all,
The distortion Fx doesn't work on VC when you select a preset and applied on it. It work only in hardware mode.
I have a friend who have the same problem on his Polar TI1
I find also the "Startin up" of VC is more long than in 3.0.3.00
Nat.
Hi all,
The distortion Fx doesn't work on VC when you select a preset and applied on it. It work only in hardware mode.
I have a friend who have the same problem on his Polar TI1
I find also the "Startin up" of VC is more long than in 3.0.3.00
Nat.
I can also confirm this.
I can load a patch with distortion on but the controls other than amount don't work and as soon as you turn the amount to 0 it stops working all together, it also appears to stop the phaser and eq section from working and I've experienced some strange goings on with the amp envelope (release knob started behaving like the decay knob?)
All is oki for me en Cubase SX3
But on Energy XT with VC
FX1: Distortion don't work
Equalizer: don't work
Phazer: don't work
Time to load the VC is slow
All is oki on Energy XT on the TIOS 3.03
Forgot to mention I'm also on Cubase 5 and the EQ had stopped working as well. If I move the knobs, save Cubase then close down and reboot Cubase the changes I've made are then applied to the sound.
I've rolled back to the OS I had previously installed for now (3.0.15 I think)
Has this been confirmed as an issue yet?
I've had this problem too. After rebooting my virus en DAW everything worked again. Still got a glitchy VC which is pretty annyoing Currently working with cubase 5.1...
we cannot replicate the problem. it would be interesting to know in which version it works and in which version it doesn't. simply opening virus control in different sequencers doesn't do the trick, that's what we tried so far.
your help is appreciated
marc
It's the same for me with VSTHost (btw. Arp On/off/Tempo... part of the UI isn't reacting as well), but works fine with Ableton Live.
we cannot replicate the problem. it would be interesting to know in which version it works and in which version it doesn't. simply opening virus control in different sequencers doesn't do the trick, that's what we tried so far.
your help is appreciated
marc
Hi Marc,
Under Cubase 5.01 and TI OS 3.0.1.15 Win XP home all works ok.
After installing TI OS 3.1 was when the problems started to occur. I think it's after you turn the distortion amount all the way off then try to turn it back on again, or changing the distortion type but I can't be sure of exactly what I did for the problem to start occuring.
I've rolled back to 3.0.1.15 and everything seems ok.
I can try and re-create it myself if you're still having trouble?
is this problem still present in 3.3.0.00?
thanks, marc
Seems to work now, I only have random problems when switching the oscillator models, the display is changing while the mode stays the same, switching seems to work properly when I leave the virus alone (not playing any notes) shortly before switching. Since I mostly work/edit the TI within VSTHost this probably isn't worth a serious bug report, but I keep my eye on this...