Posts by Aj

    Hi Folks,


    Running Snow Leopard 10.6.3 with Logic 9.1.1. 32Bit and latest virus beta. Something I have noticed for a while now, also with previous betas / releases is that when switching between the direct analog outs for tracking and then switching back to the usb o/p's, eventually the analog outs take on the same latency as the usb o/p's. As I reload the project, the problem is solved so not a major issue, but none the less annoying. I'm not sure how this is possible but please believe me it does happen all the time! I use an RME FF800 as my main I/O so the TIMK1 is set up as 3out-1in. Any thoughts?


    Ta.

    That's why I asked you about realtime and offline. You can only bounce the TI using realtime. Bounce in place is offline and you will indeed have a silent region. You need to use the bounce function set to realtime, period. If you want to bounce individual parts of the TI, solo them in Logic and then bounce realtime and check the add to audio bin option so they are in your project. If you find all the TI parts are being soloed upon soloing a single track, go into your preferences, audio, general and set Track Mute/Solo to CPU -Saving(slow response).

    I've been doing my best to trip this release up, but so far, I'm getting nowhere. Arps are solid in Logic 9.0.2 under SL 10.6.2. Patch changes are good, tweaking parameters are just as good, automation is good, GUI is GOOD! I've not tried the vocoder yet, this was giving me problems, but I'm off there right now. My display has also not lost the middle line yet either, but this could be down to the air conditioning. We'll see! Anyway, once again many thanks for the continued improvement. When people come in to my studio and see the TI, they always say 'WTF is that!" with excitement. I am now getting that feeling too, just like when I bought it. :)

    Had an odd problem last night. The message illegal spdif detected, or something along those lines was being displayed, even though the spdif is not connected. It was stuck on the screen, even after a reboot. The only way I was able to get rid of it was by reinstalling the OS.

    I've asked about this before, but I will ask again because it's very annoying. At some point during all these betas (cause it used to work), I have lost the use of the alpha numeric controls on my keypad in Logic 9 when the VC gui is in focus. It would seem that certain plugins adhere to a standard that the TI VC does not. For example, Melodyne editor. It allows me to start the transport in my host using the enter button on my keypad whilst in focus, but the VC plugin does not. I find it annoying for one reason, I'm previewing sounds and like to start and stop from there. If Celemony can do it, then I'm sure Access can.

    Hi all,


    Not sure, but I seem to recall the vocoder patches hanging before this beta version but wanted to check if anyone else has the same experience. I was trying to vocode a vocal the other evening, but when selecting the preset vocoder patches you get hanging notes, seems the same on every vocoder patch. The only way to stop them hanging is by pressing the panic buttons on the synth. Perhaps I am not using them correctly? I've used plenty of vocoders in the past mind so it does seem like very odd behaviour. Would be great if anyone could confirm either fault or user error!


    Cheers.


    Mac Pro 3Ghz 8 core, 12GB RAM, SL 10.6.2, Logic 9.0.2, Virus TIMK1Keyboard.

    Well, well. 2 arp patches on VC channels 1 and 2 on separate USB outputs and another AU running an arp, locked tight, no glitch when the TI is not selected and not in record mode. By jove, I think you've done it! I may be on my way out to pickup a TI2. Nothing short of fantastic work. Try getting another company to turn fixes around that quickly. Hats off to you folks. :)

    However, as the project starts to fill up with more plugins etc, the glitch seems to manifest itself again although not as bad as before.

    Well, well. 2 arp patches on VC channels 1 and 2 on separate USB outputs and another AU running an arp, locked tight, no glitch when the TI is not selected and not in record mode. By jove, I think you've done it! I may be on my way out to pickup a TI2. Nothing short of fantastic work. Try getting another company to turn fixes around that quickly. Hats off to you folks. :)

    By clicking the 'Don't show again' box concerning the use of 3 out 1 in and not being able to use the TI as an audio interface box seems to sort the problem. It'll crash once, but when that dialouge box is not shown on next start up, it goes to syncing patches, which is what I'm doing now.

    And if I try to load it in Kore 2 standalone:



    Process: Kore2 [264]
    Path: /Applications/Kore 2/Kore2.app/Contents/MacOS/Kore2
    Identifier: com.native-instruments.Kore2
    Version: 2.1.0.009 (2.1.0, Copyright © 2009, Native Instruments)
    Code Type: X86 (Native)
    Parent Process: launchd [111]


    Date/Time: 2009-10-01 18:49:14.738 +0100
    OS Version: Mac OS X 10.6.1 (10B504)
    Report Version: 6


    Interval Since Last Report: 20664 sec
    Crashes Since Last Report: 3
    Per-App Interval Since Last Report: 268 sec
    Per-App Crashes Since Last Report: 1
    Anonymous UUID: C5ABBB27-D419-48A1-A111-8ADE68ED1C7D


    Exception Type: EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
    Crashed Thread: 0 Dispatch queue: com.apple.main-thread


    Thread 0 Crashed: Dispatch queue: com.apple.main-thread
    0 ....virus_ti.control.audiounit 0x1e839355 AUWrapper::GetProperty(unsigned long, unsigned long, unsigned long, void*) + 835
    1 ....virus_ti.control.audiounit 0x1e8154a3 0x1e812000 + 13475
    2 ....virus_ti.control.audiounit 0x1e81e0d0 operator delete(void*, void*) + 22438
    3 ....virus_ti.control.audiounit 0x1e82f6d8 operator delete(void*, void*) + 93614
    4 ....virus_ti.control.audiounit 0x1e83c7e4 non-virtual thunk to AUWrapper::~AUWrapper() + 5450
    5 ....virus_ti.control.audiounit 0x1e83a224 AUWrapperEntry + 24
    6 ...ple.CoreServices.CarbonCore 0x97026cb6 CallComponentDispatch + 29
    7 ...apple.audio.units.AudioUnit 0x9313b341 AudioUnitGetProperty + 67
    8 com.native-instruments.Kore2 0x004d06e5 NI::HOST::AUPlug::getCurrentParameterValueAsString(unsigned int, std::basic_string<unsigned short, std::char_traits<unsigned short>, std::allocator<unsigned short> >&) + 101
    9 com.native-instruments.Kore2 0x005d90df NI::KORE::DESC::PlugInParameter::getValueString(std::basic_string<unsigned short, std::char_traits<unsigned short>, std::allocator<unsigned short> >&, bool) const + 47
    10 com.native-instruments.Kore2 0x0065c593 NI::KORE::DESC::ControllerAssignment::getValueString(std::basic_string<unsigned short, std::char_traits<unsigned short>, std::allocator<unsigned short> >&, bool) const + 147
    11 com.native-instruments.Kore2 0x00a1834e NI::KORE::GUI::LabelControlParameterLink<NI::KORE::EAL::ControllerAssignment, NI::KORE::EAL::_Parameter<float> >::update() + 94
    12 com.native-instruments.Kore2 0x009c9bea NI::KORE::GUI::PageDisplay::connectToSelectedParameter() + 1098
    13 com.native-instruments.Kore2 0x009ca06c NI::KORE::GUI::PageDisplay::attach(NI::KORE::EAL::ControllerPage const&) + 604
    14 com.native-instruments.Kore2 0x009b5932 NI::KORE::GUI::PageDisplay::updatePage() + 66
    15 com.native-instruments.Kore2 0x009dfabb NI::KORE::GUI::ModuleHeader::updatePage() + 107
    16 com.native-instruments.Kore2 0x009e0a7c NI::KORE::GUI::ModuleHeader::attach(NI::KORE::EAL::Module const&) + 1532
    17 com.native-instruments.Kore2 0x00ae7908 NI::KORE::GUI::GlobalControllerForm::notify(NI::KORE::EAL::Slot const&) + 168
    18 com.native-instruments.Kore2 0x00ae7764 NI::KORE::FocusManager::onEvent(unsigned int, NI::UIA::EventData*) + 196
    19 com.native-instruments.Kore2 0x003b462f NI::UIA::EventTarget::sendEvent(unsigned int, NI::UIA::EventData*) + 31
    20 com.native-instruments.Kore2 0x003b4846 NI::UIA::DETAIL::EventTimerSubscription::tick(unsigned int) + 118
    21 com.native-instruments.Kore2 0x003aa8a8 NI::UIA::Application::processTimer() + 104
    22 com.apple.CoreFoundation 0x90523eee __CFRunLoopRun + 6846
    23 com.apple.CoreFoundation 0x90521d34 CFRunLoopRunSpecific + 452
    24 com.apple.CoreFoundation 0x90521b61 CFRunLoopRunInMode + 97
    25 com.apple.HIToolbox 0x97313fec RunCurrentEventLoopInMode + 392
    26 com.apple.HIToolbox 0x97313da3 ReceiveNextEventCommon + 354
    27 com.apple.HIToolbox 0x9749bcde _AcquireNextEvent + 54
    28 com.apple.HIToolbox 0x97491a20 RunApplicationEventLoop + 228
    29 com.native-instruments.Kore2 0x003c4c7d NI::UIA::Application::run() + 125
    30 com.native-instruments.Kore2 0x003b0bd3 NI::UIA::DETAIL::AppModuleStartup::run() + 99
    31 com.native-instruments.Kore2 0x0000a9c3 main + 531
    32 com.native-instruments.Kore2 0x00002b4b _start + 209
    33 com.native-instruments.Kore2 0x00002a79 start + 41

    Not a great start for me -



    Process: Logic Pro [193]
    Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
    Identifier: com.apple.logic.pro
    Version: 9.0.1 (1664.13)
    Build Info: Logic-16641300~1
    Code Type: X86 (Native)
    Parent Process: launchd [111]


    Date/Time: 2009-10-01 18:28:27.899 +0100
    OS Version: Mac OS X 10.6.1 (10B504)
    Report Version: 6


    Interval Since Last Report: 19418 sec
    Crashes Since Last Report: 2
    Per-App Interval Since Last Report: 13079 sec
    Per-App Crashes Since Last Report: 2
    Anonymous UUID: C5ABBB27-D419-48A1-A111-8ADE68ED1C7D


    Exception Type: EXC_BAD_ACCESS (SIGABRT)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
    Crashed Thread: 0 Dispatch queue: com.apple.main-thread


    Application Specific Information:
    abort() called


    Thread 0 Crashed: Dispatch queue: com.apple.main-thread
    0 libSystem.B.dylib 0x97e2a912 __kill + 10
    1 libSystem.B.dylib 0x97e2a904 kill$UNIX2003 + 32
    2 libSystem.B.dylib 0x97ebdb99 raise + 26
    3 libSystem.B.dylib 0x97ed3be5 __abort + 124
    4 libSystem.B.dylib 0x97ed3c61 abort_report_np + 0
    5 com.apple.logic.pro 0x003d7e64 0x1000 + 4025956
    6 libSystem.B.dylib 0x97e2fb9b _sigtramp + 43
    7 ??? 0x0000000a 0 + 10
    8 ...sic.virus_ti.control.bundle 0x54eaa172 ExitMachOLibrary + 61892
    9 ...sic.virus_ti.control.bundle 0x54ea369c ExitMachOLibrary + 34542
    10 ...sic.virus_ti.control.bundle 0x54ea94d3 ExitMachOLibrary + 58661
    11 ...sic.virus_ti.control.bundle 0x54eaa8d4 ExitMachOLibrary + 63782
    12 ...sic.virus_ti.control.bundle 0x54ec09c6 ExitMachOLibrary + 154136
    13 ...sic.virus_ti.control.bundle 0x54e3f04f main_macho + 236743
    14 ...sic.virus_ti.control.bundle 0x54e3ce3e main_macho + 228022
    15 com.apple.CoreFoundation 0x90523eee __CFRunLoopRun + 6846
    16 com.apple.CoreFoundation 0x90521d34 CFRunLoopRunSpecific + 452
    17 com.apple.CoreFoundation 0x90521b61 CFRunLoopRunInMode + 97
    18 com.apple.HIToolbox 0x97313fec RunCurrentEventLoopInMode + 392
    19 com.apple.HIToolbox 0x97313da3 ReceiveNextEventCommon + 354
    20 com.apple.HIToolbox 0x97313c28 BlockUntilNextEventMatchingListInMode + 81
    21 com.apple.AppKit 0x93f15c95 _DPSNextEvent + 847
    22 com.apple.AppKit 0x93f1550a -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 156
    23 com.apple.AppKit 0x93ed769b -[NSApplication run] + 821
    24 com.apple.prokit 0x00f49a01 NSProApplicationMain + 326
    25 com.apple.logic.pro 0x00003bc6 0x1000 + 11206


    Crashes every time I try to load the 3 x Stereo version.