I'm in no rush to update, but just wondering if anyone's given it a whirl yet?
I have too much other kit which would hold me back for a while anyhow. 
Anyone tried Virus on MacOS Mojave yet?
-
Tried Mojave and everything worked fine just no way to get any of my gear working that comes into my interface over adat
-
good news
thx for sharing -
I can also confirm that all is well, phew!
-
However...... I did get a notice on the Mac today saying that the Virus Ti MIDI Driver is 32 bit and so it won't work after the next macOS update... this is worrying! So, what's the latest news about a full 64 bit macOS version of the Virus Ti2 software please? Thanks.
EDIT: It appears that the /Library/Audio/Plug-Ins/HAL/de.access-music.virus_ti.plugin/Contents/MacOS/de.access-music.virus_ti - is 32 bit and also the /Library/Audio/MIDI Drivers/Virus TI MIDI Driver.plugin/Contents/MacOS/Virus TI MIDI Driver as part of the MIDIServer process is also 32 bit.
Mark? Can you advise please Sir? Thanks man.
-
Can anyone comment on which DAW and setup they are using with success, please? I just ordered a new Mac Mini and keeping my fingers crossed that all TI functions operate well.
I ran a test on an older MacBook Pro with Mojave and it wouldn’t even find my Virus. I typically run a PC for my audio work and this will be my first Mac in the studio. I’m a little nervous!
EDIT: Got it working... the driver was being blocked and needed to be released in the security settings.
-
Hi all,
I'm on Mac OS 10.10.5 and Logic 9.
Appreciating now that perhaps its time i update to Logic X and of course latest version of Mac OS.
I'm unable to update to the last known supported Mac OS of 10.13, so understandably I'm nervous about upgrading to 10.14(/Mojave).
Marc/Anyone - when will we have a compatibility confirmation?
-
Marc/Anyone - when will we have a compatibility confirmation?
yes
-
Just updated macOS from 10.12.6 (Sierra) to 10.14.2 (Mojave) yesterday. Everything seems to be fine, actually working better and faster.
-
Has any body had any problems with the new Apple Macs with T2 chips affecting the Virus?
-
I am running the TI plugin on Mojave on a 2018 mac mini with T2 chip no problem.
-
I am running the TI plugin on Mojave on a 2018 mac mini with T2 chip no problem.
Same. Cubase 10.
-
I was running Mojave with my 2018 MBP fine until the latest Logic Pro update to 10.4.5 where I can no longer record Automation from my Virus, is anyone else having this issue?!
-
I'm struggling to get my TI to work on Logic Pro X on my brand new iMac (3.6GHz i9, 64GB, Radeon Pro Vega 48) with Mojave. I can see Logic reacting to the MIDI input, but no audio. I also keep getting the "No Virus TI can be found" error message in Virus Control. Have tried the suggested reset, checked different USB ports (incl. USB-C via an Apple USB-C to USB dongle). Anyone able to assist?
-
I'm struggling to get my TI to work on Logic Pro X on my brand new iMac (3.6GHz i9, 64GB, Radeon Pro Vega 48) with Mojave. I can see Logic reacting to the MIDI input, but no audio. I also keep getting the "No Virus TI can be found" error message in Virus Control. Have tried the suggested reset, checked different USB ports (incl. USB-C via an Apple USB-C to USB dongle). Anyone able to assist?
Did you 'Approve' the security request when you loaded the software the first time? If not then reboot your Mac, when the desktop appears again, go straight into System Preferences, Security & Privacy, and click the approve button at the bottom. Hope that helps.
-
Same issue!
Currently trying to get my Virus TI 2 to work with my brand new macbook pro 2019 . Mojave 10.14.5 . 2.4 Ghz i9, 32 GB ram.
Ive used my TI2 desktop for 10 years now. Best most versatile thing out there. Still. IMO. WHEN IT WORKS.
I KNEW this wasn't going to be easy (never has been with the virus)
I'm connected via laptops USB-C -> multi USB hub
The macbook/logic recognises the audio device being connected, you can choose to use at as a sound card, however the Virus control software is not working.
The famous/dreaded message 'No Virus can be found.' appears.
I have followed the suggested steps but to no success.
In the past I had a Hackintosh, had the same issue, took me weeks to fix it, in the end I had to I downgrade the USB drivers in the bios to accommedate the TI2's needs. (TI2 was struggling to connect to USB3.0 ports, it wanted old school 2.0 connection) PS. I dont want to do that again.
Marc or anyone else qualified, Is there anything you could suggest me trying on my new system to get the integration working ?
I need my baby back.
Joe Hertz
-
I was running Mojave with my 2018 MBP fine until the latest Logic Pro update to 10.4.5 where I can no longer record Automation from my Virus, is anyone else having this issue?!
Yes same issue. 2012 MacBook Pro. 10.14.5. Will update Logic and MacOS in the next day or so and report
-
Work perfect with Mojave 10.14.6, MacBook Pro (USB-C) and iMac 2014.
Virus TI2
+
Analog Rytm MKII
Maschine MKII
Kontrol X1
Drumbrute
Minibrute 2S
Modular synth (Eurorack)
Novation Zero MKII
Nord Modular G2 and Micromodular.
---
RME Fireface with ADAT Alesis.
-
Display More
Work perfect with Mojave 10.14.6, MacBook Pro (USB-C) and iMac 2014.
Virus TI2
+
Analog Rytm MKII
Maschine MKII
Kontrol X1
Drumbrute
Minibrute 2S
Modular synth (Eurorack)
Novation Zero MKII
Nord Modular G2 and Micromodular.
---
RME Fireface with ADAT Alesis.
Please let us know what USB Hubs you use and how your devices are connected.
