Some one can help me
I can't open my T.I by the software Virus Control Acess with logic
The software doesn't work... Please help
My OS is High Sierra Version 10.13.4
Some one can help me
I can't open my T.I by the software Virus Control Acess with logic
The software doesn't work... Please help
My OS is High Sierra Version 10.13.4
Have you just installed the software?
If so do the following. Restart the Mac. As soon as it boots up to the desktop (Finder) again, go to the Apple Menu, then System Preferences, Security & Privacy. At the bottom you should see a button that says 'Allow'. Click that. Then load up Logic and all should be well.
My Virus TI2 on Windows 10, keeps dropping lock. I.e. TI cannot be found keeps coming up and i have to remove all cables to get virus to sync with PC again... anyone else experiencing this?
Naveman00 I had exactly the same problem the only way I found to sort it was to disconnect all cables from Virus and switch it off, uninstall virus software from computer reinstall,reboot computer then run virus control centre reconnect virus as long as you have the latest software it should work.
Appreciate the input DR2312. I will attempt a reinstall and see if this clears up the problem. Thank you.
Have you just installed the software?
If so do the following. Restart the Mac. As soon as it boots up to the desktop (Finder) again, go to the Apple Menu, then System Preferences, Security & Privacy. At the bottom you should see a button that says 'Allow'. Click that. Then load up Logic and all should be well.
could not get my TI Snow working on my new macbook pro running Mojave 10.14.4 and this did the trick, and i didn't see this mentioned anywhere else. thank you!
Naveman00 I had exactly the same problem the only way I found to sort it was to disconnect all cables from Virus and switch it off, uninstall virus software from computer reinstall,reboot computer then run virus control centre reconnect virus as long as you have the latest software it should work.
This did it for me! THANK YOU!
I have the same issue but on latest Windows 10, 1903. Windows recognizes the USB device. But opening up the Virus Control center it starts looking
and saying cannot be found. It suggest to unplug, turn off, wait 30 seconds and hold down Exit key while starting virus and then connecting USB. But this doesnt change a thing. Won't still recognize. I will now try to deinstall Virus Control Center and reboot and try that...
Anyone else experienced problems with Windows 10 1903 and Virus Control Center?
Update: I tried reinstalling, but same problem. I tried different USB ports simply moving the USB cable around to try different ports. eventually I found one that it works with.
So I suggest to resolve issues with not found: TRY DIFFERENT USB PORTS. My backpanel on the motherboard didn't recognize the Virus. But the USB port from the front panel breakout of the Tower PC worked. Was USB 3.0. Which works just fine. Backpanel i tried both USB 3.0 and USB1.0/2.0 ports which wouldn't work.
Thank you p4nz3r, I now have found a USB port that makes Win 10 recognize my Virus TI2 (that is, it now shows up in Device Manager without the warning symbol)!!
[WIN11] I only got mine to work by deleting a bunch of stuff from Device Manager, uninstalling and reinstalling the sw, holding EXIT while power cycling and letting it go through the "update" (it's up to date). Lord knows if it will work tomorrow because I had it working the other day and then I assume it felt a draft and got all discombobulated.
After trying two other cables and finding one that seems to make and keep a connection consistently. I now believe it is a hardware issue. I need to get this unit's mod wheels fixed so I'll see about getting the USB port replaced as well. We'll see if it happens again...
These head aches led me to use the Aura Mystery Islands software that works better for me. Even when I got the virus software working on windows and older Mac OS, it was buggy and slow AF to use.
Hi, I had major issues getting my old Korg M3 connected to Windows 10 via USB just a few weeks ago.
I found this little help page explaining what to do to get it to work.
https://www.korguser.net/html/…Installation%20Manual.HTM
>> Find the important part under: "Uninstalling the KORG USB-MIDI Driver using a tool"
- Korg is having the issue, that the USB-MIDI driver MUST be one of the first 10 midi devices.
- Maybe the Korg MIDI tool helps to solve your Virus issues too. It is worth a try...
- You need to install the Korg driver, to use the deinstall tool to free-up a slot for the Virus.
- First deinstall the Virus USB-Midi driver of course
You find some YouTube tutorials as well, but they are tiresome to listen to - the official guide is better.
I tried the tool, got Virus TI in midi4. Doesn't connect today! Don't feel like going through the "process" again. Gonna look into the VirusHC plugin to program it via MIDI ... because this is pitiful ...
IME, if you face these kind of issues, you either have a problem in your USB bus (can be the hardware in computer, hubs, cables, other devices) or a defective Virus TI.
My Virus was stable over several years, then all of a sudden started acting up each time I switched on my setup. It seemed totally random. After some investigation, I found other devices also malfunctioning at random, like an USB stick unmounting spontaneously. When unplugging several (random) devices, everything was stable again. Thus it seemed not to be directly connected to the Virus.
Since upgrading from my 2013 MacBook Pro to a 2018 Mac Mini with 4 USB-C ports connecting two USB-3 MTT hubs (which I already had before), the Virus TI and everything else is rock solid.
My conclusion is that there were too many USB devices hooked up to the (old outdated) USB bus on the MacBook Pro.
For Windows there is a little program to remove unused USB devices. Windows has a very bad USB management.
I use Nirsoft tools since the 90th (not only the webpage looks like from the 90th) - no installation required.
https://www.nirsoft.net/utils/usb_devices_view.html
You will be surprised how many USB drivers are "sleeping" in the Registry, or should I rather say - how many Zombie drivers are just hanging around....
I tried that tool and it seems to have worked. Thanks
Now I might not have to buy VirusHE...
Lost connection while using VC (no audio) and can't reconnect. Sigh
power off and unplug the cables then try again.
That's why I try every single time over and over. I gave up and am now using VirusHE.